Skip to main content

COVID-19 Updates — September 23, 2022 Update: Explore Scouts Canada’s actions as we continue to follow the direction of government and health agencies in maintaining public health. View recommendations and stay informed here.

Tin Can Lanterns

Design and create your own tin can lantern and watch your art glow!

Back to Activity Finder

Plan

  • What supplies do you need for this activity?
  • What design will you put on your lantern?
  • How will you make sure that you are safe throughout the process of making your lantern?

Do

  • Take a tin can that has been cleaned and remove its label.
  • Fill it with water and let it freeze – it is much easier to use a can with ice in it than an empty can.
  • Create a steady surface for your can – you can make one out of snow or create one from wood or other materials.
  • Once your can is frozen, draw your design onto it using a permanent marker. The open end of the can is the top, so make sure your design is facing the right way.
  • Punch out the design carefully using a hammer and awl (or other similar materials)
  • Once you’ve punched out your design, punch two more holes on the opposite sides of the top of the can and thread a wire through it. Use pliers to fold the ends of the wire.
  • Let the ice in your tin can melt – leave them in a sink or somewhere else that the water can easily drain.
  • Place a light at the bottom of the can and admire the glow of your work!

Review

  • What was the most challenging part of this adventure?
  • If you were to do this adventure again, what would you do differently?

Materials

  • Tin can (cleaned and with the label removed), with ice frozen inside
  • Design template
  • Permanent marker
  • Awl and hammer
  • Light

Keep it Simple

  • Use the same principle but rather than making a tin can lantern, make a mini version using a toilet paper tube and punch holes using a pencil with a piece of clay held behind to support. Use a battery-powered light to create a light safely.

Take it Further

  • Create a series of designs on your lanterns that tell a story or try for a more challenging design like your Group crest or badge!